Installation Prerequisites

Owned by Steve Baer (Unlicensed)
Last updated: Oct 08, 2024 by Lakshmikanth Pasupuleti
4 min read

 Windows Installation Prerequisites for Agent

In your assessment, you can download the Windows installer file from the Setup - > Agent Setup tab. You can download the MSI file or copy the command to be run from an elevated command prompt. The command line pictured below shows options for a proxy server with authentication required. These options are also available in the MSI file but are not required to install the agent.

Access to our servers at am.cloudamize.com for US infrastructure, am-de.cloudamize.com for EU infrastructure, or am-ae.cloudamize.com for UAE infrastructure over port 443 directly or through a corporate proxy.

Windows installation and troubleshooting Procedures can be found here: Installation & Troubleshooting.


Windows Installation Prerequisites for Agentless Data Collector

The table below lists the relevant ports for machine discovery and communication to the Cloudamize servers. Please note the following rules for each class of machine:

  • Machine with Cloudamize Agentless Data Collector installed:

    • TCP port 445 open inbound from remote Windows hosts added to Cloudamize Agentless Data Collector.

    • Access to our servers at am.cloudamize.com for US infrastructure, am-de.cloudamize.com for EU infrastructure, or am-ae.cloudamize.com for UAE infrastructure over port 443 directly or through a corporate proxy.

      • If your system locally caches DNS resolution, you may need to resolve am.cloudamize.com to 35.171.170.26 or am-de.cloudamize.com to 18.194.12.63 to allow egress traffic. This feature is not currently available for our UAE region.

  • Each Windows endpoint:

    • TCP port 445 open outbound to the machine with the Agentless Data Collector installed.

    • TCP ports 135 and the dynamic RPC port ranges open inbound, appropriate for your OS versions:

      • Windows Server 2008 and later: TCP ports 49152 to 65535 open inbound.

      • Windows Server 2003 and earlier: TCP ports 1025 to 5000 open inbound.

  • Each Linux endpoint:

    • TCP port 22 open inbound.

Protocol

Port

Usage

TCP

22

SSH to access Linux servers

TCP

135

Windows RPC

TCP

445

Microsoft-DS Active Directory and SMB, Windows shares

TCP

1025-5000

RPC dynamic port range for Windows Server 2003 and earlier

TCP

49152-65535

RPC dynamic port range for Windows Server 2008 and later

TCP

443

SSL to communicate with the Cloudamize servers

Fig. 2 Ports relevant to the Cloudamize Agentless Data Collector

Authentication requirements for machines from an Agentless Data Collector

  • Windows machines require an account in the Administrators group (Domain Admin Account).

  • Linux machines require Root or Wheel access.

  • All other Windows and Linux system requirements apply.

  • The account should be set up with a static password (non-expiring password) for the desired data collection duration. This prevents the account from being locked out due to password expiration, which may result in authentication failure from the ADC to the target machine.
    Note: If the password is not static, the customer must update the ADC UI with the new password every time the password is changed.

Minimum System Requirements for Agentless Installer

The Cloudamize Agentless Data Collector will need to be installed on a physical or virtual Windows machine, meeting the following minimum requirements:

Note: The agentless data collector runs obfuscated code, which is susceptible to AV quarantine. Both the agentless installer (insert here) and the agentless watchdog (insert here) should be whitelisted or run on a VM without AV running, if possible.

Linux Installation Prerequisites for Agent

You can access the Linux installer command and Customer Key in your assessment from the Setup → Agent Setup tab.

  • The Install script requires wget to retrieve content and curl to test/verify access to our data collection servers at am.cloudamize.com for US infrastructure, am-de.cloudamize.com for EU infrastructure, or am-ae.cloudamize.com for UAE infrastructure over port 443, either directly or through a corporate proxy.

    • If your system locally caches DNS resolution, you may need to resolve am.cloudamize.com to 35.171.170.26 or am-de.cloudamize.com to 18.194.12.63 to allow egress traffic. This feature is currently not available for our UAE region.

  • Root and/or wheel access

  • One of the following OSes:

    • Red Hat Enterprise Linux Server release 7.0 or higher

    • Oracle Linux 6.5 or higher

    • Ubuntu 16.04 or higher

    • CentOS release 7 or higher

    • Debian GNU/Linux 8.0 or higher

    • Amazon Linux AMI release 2013.03 or higher

    • Fedora release 12 or higher

    • Suse Linux 11 or higher

  • A supported version of OpenSSL.

  • 350 MB persistent storage.

 

The Cloudamize Linux Agent requires 3% of CPU and 5% of memory while running.

Linux installation and troubleshooting Procedures can be found here.

vCenter Proxy Installation Prerequisites

  • 64-bit Windows Server 2003 R2 or higher

  • .NET Framework version 4.0

  • 4 CPU cores

  • 5 GB RAM

  • 2 GB persistent storage

  • Access to vCenter appliance over port SSL Port 443

  • Access to Cloudamize vCenter data collection server (52.202.114.20) using SSL over a supported port (default port 444, 80 or 22)

Note: No software is installed directly on vCenter. The only requirements are the requisite open ports for the Cloudamize Proxy or Cloudamize application to connect directly. A direct connection is only possible if a vCenter is on a public IP Address and internet-facing.

vCenter Installation, access tests, and troubleshooting documentation can be found here.

Supported Chipsets for all installation types

  • Intel Xeon

  • AMD Opteron

  • Pentium 4

  • Pentium D

  • Pentium M

  • Some Intel Core 2